Sony MDR-RF5000K Operating Instructions - Page 16
Connection, Notes, Connecting cables sold separately, Notes on optical digital connecting cable - support
![]() |
View all Sony MDR-RF5000K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Notes • Do not input signals other than PCM to the DIGITAL IN jack. Be sure to set optical digital output of a connected AV component to PCM. If multi-channel signals are input from a DVD device, sound may not be transmitted. Note that excessive noise may occur if CD signals recorded in MPEG-2AAC or DTS format are input to this unit. • The optical digital connecting cable is an extremely high-precision device and is sensitive to jolts and external pressure. Therefore, be careful when inserting and removing the cable plug. • The digital input for the transmitter does not support sampling frequencies of 96 kHz. Set the digital output setting of the DVD device to 48 kHz when using this system. Noise may be heard when a 96 kHz digital signal is input. Connecting cables (sold separately) Use the optical digital connecting cable POC-15AB (mini-plug y rectangular plug) when connecting the optical digital output mini-jack on portable DVD players, portable CD players, or other digital components to the DIGITAL IN jack. Notes on optical digital connecting cable • Do not drop objects on the optical digital connecting cable or expose the cable to shock. • Grasp the plug to connect or disconnect the cable. • Be sure that the ends of the optical digital connecting cable are kept clean. Dust at the ends of the cable can degrade performance. • When storing the system, attach the cap to the end of the plug and be careful not to fold or bend the optical digital connecting cable with a bend radius less than 25 mm (1 inch). The bend radius of the optical digital connecting cable should be no less than 25 mm (1 inch). 25 mm (1 inch) 16US Connection
![](/manual_guide/products/sony-mdrrf5000k-operating-instructions-08b0a6c/16.png)