Sony MDS-JA333ES Operating Instructions - Page 15
Record-protect tab, Slide in the direction, of arrow
View all Sony MDS-JA333ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Recording to MDs 8 Press N or X. Recording starts. 9 Start playing the program source. Operations you may want to do during recording To Stop recording Pause recording Press x X Resume recording after pausing Eject the MD N or X OPEN/CLOSE A after stopping recording To change the display while recording Press DISPLAY/CHAR (or DISPLAY) repeatedly to change the display. Each press of the button changes the display as follows: Track number and recorded time of the current track r Level of the input signal1) r Sampling frequency indication "FS -- kHz" appears while the analog signal is input. r DF (digital filter) display 1) "Analog In" appears while the analog signal is input. When you pause recording The track number increases by one. For example, if you paused recording while recording track 4, the track number will be 5 when you resume recording. To prevent accidental erasure of the recorded material To protect an MD recording, slide the record-protect tab in the direction of the arrow (see illustration below) to open the slot. To enable re-recording, close the slot. Record-protect tab z You can play from the first track of the MD after recording 1 Press x again after stopping recording. 2 Press N. The deck starts to play from the first track of the MD. Note You cannot record over existing material when Shuffle Play (page 27) or Program Play (page 27) has been selected. "Impossible" appears in the display at this time. Slide in the direction of arrow z You can play the tracks you have just recorded Press N immediately after stopping recording. The deck starts to play from the first track of the material just recorded. 15 Recording to an MD GB