Sony MDS-JA333ES Operating Instructions - Page 24

Playing MDs z You can adjust the analog output signal level to the ANALOG OUT jacks and the PHONES jack 1 While the deck is playing, press DISPLAY/CHAR (or DISPLAY) repeatedly until the line output adjustment display appears. 2 Press DIGITAL REC LEVEL/ANALOG OUT LEVEL +/- on the remote repeatedly to adjust the output signal level (from -20.0 dB to 0.0 dB). Note When you eject the MD or turn off the deck, the output level is reset to the factory setting (0.0 dB). To change the display during playing Press DISPLAY/CHAR (or DISPLAY) repeatedly to change the display. Each press of the button changes the display as follows: Track number and elapsed time of the current track r The contents of a program (only when "PGM" lights up) r Disc name and track name r Level of the output signal r Pitch display r DF (digital filter) display z You can check the remaining time Press TIME during playback. Each press of the button changes the display as follows: Track number and elapsed time of the current track r Track number and remaining time of the current track r Remaining time of all recorded tracks z You can check the track name while playing (only when the track name is recorded) Z Press SCROLL. The track name appears and scrolls. While the track name is scrolling, press the button again to pause scrolling, and again to continue scrolling. Playing a specific track While the deck is playing or stopped, use the procedure below to quickly play any track. ` / 1 Z AMS Number buttons >25 M.SCAN ./> H X x .> z mM X .> N Locating a track with AMS1) To go to Do the following: The next or a succeeding track Turn AMS clockwise (or press during play > repeatedly). A preceding track during play Turn AMS counterclockwise (or press . repeatedly). The beginning of the current Turn AMS counterclockwise track during play (or press . once). A specific track while the deck is stopped Turn AMS (or press ./ > repeatedly) until the track number you want to go to flashes in the display, then press AMS or N. A specific track by scanning each track for six to twenty seconds (Music Scan) Z Press M.SCAN before you start playing. When you find the track you want, press H to start playing. 1) Automatic Music Sensor z You can locate the last track of the MD quickly While the deck is stopped, turn AMS counterclockwise (or press . once). z If you locate a track while the deck is stopped or paused The deck will still be stopped or paused at the beginning of the located track. 24 GB Playing an MD/Playing a specific track