Sony MDS-JA333ES Operating Instructions - Page 22
The MD deck changes to recording pause., The deck starts recording and the CD player starts
View all Sony MDS-JA333ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Recording to MDs Operations you may want to do during CD Synchro-recording To Press Stop recording Pause recording Locate the next track to be recorded during recording pause Resume recording after pausing Check the remaining recordable time on the MD CD-SYNC STOP CD-SYNC STANDBY or CD PLAYER X CD PLAYER ./> CD-SYNC START or CD PLAYER X TIME (page 18) z You can use the remote of the CD player during CD Synchro-recording Press To change the deck to And change the CD player to H Recording Play x Recording pause Stop X Recording pause Pause z During CD Synchro-recording, track numbers are marked in the following ways: • When the CD player is connected to the DIGITAL IN connector, track numbers are automatically marked as they appear on the CD. • When the CD player is connected to the ANALOG IN jacks, track numbers are automatically marked when "T.Mark Lsyn" has been selected (page 19). • When you resume recording after recording pause, a new track number is automatically marked, regardless of the track marking parameter setting ("T.Mark Lsyn" or "T.Mark Off"). z You can change CDs during CD Synchro-recording 1 Press x on the CD player's remote. 2 Change the CD. 3 Press H on the CD player's remote. Recording resumes. z You can also perform synchro-recording with a Sony video CD player By reprograming the MD's remote, you can use the procedure above to perform synchro-recording with a Sony video CD player. Press number button 2 while pressing down ?/1 on the MD deck's remote. You can now operate the MD deck and the video CD player with the remote. To control the CD player again, press number button 1 while pressing down ?/1 on the MD deck's remote. z During CD Synchro-recording, the deck copies CD text information (CD text and disc memos) as it is to the MD (Disc Memo Copy Function) The Disc Memo Copy Function operates when you make a CD Synchro-recording from a Sony CD player connected with a control A1ΙΙ cable (not supplied) to the MD deck. Notes • When performing CD Synchro-recording with a CD player with a mode selector, be sure to set the selector to CD1. 22 GB Synchro-recording with a Sony CD player • When you record tracks from certain CD or multi-disc players, the entire material may be recorded as a single track. • The Disc Memo Copy Function may not operate for extremely short CD tracks. • Text information may not be copied for some CDs. Making a CD Synchro-recording from a Sony CD player connected with a control A1ΙΙ cable 1 Do steps 1 to 3 of "Synchro-recording with a Sony CD player" on page 21. 2 Set the CD player to playing pause mode. 3 Press z on the deck. The MD deck changes to recording pause. 4 Press N or X on the deck. The deck starts recording and the CD player starts to play. When CD play finishes, recording stops.