Sony MDS-JA333ES Operating Instructions - Page 36

Editing Recorded MDs To erase a character Press m/M repeatedly until the character to be erased flashes, then press CLEAR. 9 Press YES. The whole name appears in the display, followed by "Complete!!" to indicate that the labeling procedure is completed. To cancel the operation Press MENU/NO or x. Naming a track or an MD using the remote Z 1 Press NAME while the deck is in one of the operating modes listed below, depending on what you want to name: To name Press while the deck is A track Playing, paused, recording, or stopped with the track number displayed The MD Stopped with total number of tracks displayed A flashing cursor appears in the display. 2 Select the character type as follows: To select Press Uppercase letters CHAR repeatedly until "Selected AB" appears in the display Lowercase letters CHAR repeatedly until "Selected ab" appears in the display Numbers and NUM repeatedly until "Selected 12" symbols1) appears in the display 1) Only can be selected. 3 Enter a character using letter/number buttons. When you press each button, the cursor shifts to the right. You can also select a character by pressing ./ >. 4 Repeat steps 2 and 3 to enter the rest of the name. To change a character Press m/M repeatedly until the character to be changed flashes, press CLEAR to erase the character, then repeat steps 2 and 3. 5 Press NAME. The whole name appears in the display, followed by "Complete!!" to indicate that the labeling procedure is completed. To cancel the operation Press MENU/NO or x. 36 GB Naming a track or MD Copying a track or disc name You can copy an existing track or disc name and use it to name another track on the same disc or the disc itself. 1 While the deck is stopped, playing, or paused, press MENU/NO. "Edit Menu" appears in the display. 2 Turn AMS (or press ./> repeatedly) until "Name ?" appears, then press AMS or YES. 3 Turn AMS (or press ./> repeatedly) until "Nm Copy ?" appears, then press AMS or YES. 4 Turn AMS (or press ./> repeatedly) until the track number (when copying the track name) or "Disc" (when copying the disc name) flashes, then press AMS or YES to copy the selected name. When "No Name" appears in the display The selected track or disc has no name. 5 Turn AMS (or press ./> repeatedly) until the track number (when naming a track) or "Disc" (when naming a disc) flashes, then press AMS or YES to enter the copied name. "Complete!!" appears for a few seconds and the name is copied. To cancel the operation Press MENU/NO or x. z When "Overwrite ?" appears in step 5 above The track or the disc selected in step 5 already has a name. If you wish to replace the name, press AMS or YES again while the indication appears in the display. Renaming a track or MD Z 1 Press NAME while the deck is in one of the operating modes listed below, depending on what you want to rename: To rename A track The MD Press while the deck is Playing, paused, recording, or stopped with the track number displayed Stopped with total number of tracks displayed A track or disc name appears in the display. 2 Press down CLEAR until the selected name is erased completely. 3 Do steps 5 to 8 of "Naming a track or an MD using the controls on the deck" on page 35 or steps 2 to 4 of "Naming a track or an MD using the remote" on page 36. 4 Press NAME. The whole name appears in the display, followed by "Complete!!" to indicate that the labeling procedure is completed.