Sony MEX-N5200BT Operating Instructions - Page 24
Display Setup (display), Bluetooth Setup (bluetooth), Dimmer, Brightness, Button-c, Dspl-c, Snd Sync - bluetooth pairing
View all Sony MEX-N5200BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Display Setup (DISPLAY) DIMMER Changes the display brightness: For MEX-N5200BT: [OFF], [ON], [AT] (auto), [CLK]. ([AT] is available only when the illumination control lead is connected, and the head light is turned on.) For MEX-N4280BT: [OFF], [ON], [CLK]. To set this function to be active only during a fixed period, select [CLK], then set the start and end times. - To set the brightness when the dimmer function is activated: Set [DIMMER] to [ON], then adjust [BRIGHTNESS]. - To set the brightness when the dimmer function is deactivated: Set [DIMMER] to [OFF], then adjust [BRIGHTNESS]. The brightness setting is stored and applied when the dimmer function is activated or deactivated. BRIGHTNESS Adjusts the display brightness. The brightness level is adjustable: [1] - [10]. BUTTON-C (button color) (MEX-N5200BT only) Sets a preset color or customized color for the buttons. COLOR Selects from 15 presets colors, 1 customized color. CUSTOM-C (custom color) Registers a customized color for the buttons. RGB RED, RGB GRN, RGB BLUE Adjustable color range: [0] - [32] ([0] cannot be set for all color ranges). DSPL-C (display color) (MEX-N5200BT only) Sets a preset color or customized color for the display. COLOR Selects from 15 presets colors, 1 customized color. CUSTOM-C (custom color) Registers a customized color for the display. RGB RED, RGB GRN, RGB BLUE 24GB Adjustable color range: [0] - [32] ([0] cannot be set for all color ranges). SND SYNC (sound synchronization) Activates the synchronization of the illumination with the sound: [ON], [OFF]. AUTO SCR (auto scroll) Scrolls long items automatically: [ON], [OFF]. (Not available when the AUX or tuner is selected.) BLUETOOTH Setup (BLUETOOTH) PAIRING (page 9) Connects up to two BLUETOOTH devices: [DEVICE 1], [DEVICE 2]. [DEVICE 1] or [DEVICE 2] will be changed to the paired device name after pairing is complete. AUDIODEV (audio device) Selects the audio device. [*] appears on the device paired with [DEVICE 1] or the current A2DP compatible audio device. RINGTONE Selects whether this unit or the connected cellular phone outputs the ringtone: [1] (this unit), [2] (cellular phone). AUTO ANS (auto answer) Sets this unit to answer an incoming call automatically: [OFF], [1] (about 3 seconds), [2] (about 10 seconds). AUTOPAIR (auto pairing) Starts BLUETOOTH pairing automatically when iOS device version 5.0 or later is connected via USB: [ON], [OFF]. BT SIGNL (BLUETOOTH signal) (page 10) Activates/deactivates the BLUETOOTH function.