Sony MEX-N5200BT Operating Instructions - Page 33
Messages, SongPal operation, Pandora® operation
View all Sony MEX-N5200BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Pairing failed due to a timeout. Depending on the connecting device, the time limit for pairing may be short. - Try completing the pairing within the time. BLUETOOTH function cannot operate. Turn off the unit by pressing OFF for more than 2 seconds, then turn the unit on again. No sound is output from the car speakers during handsfree call. If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers. Siri Eyes Free is not activated. Perform the handsfree registration for an iPhone that supports Siri Eyes Free. Set the Siri function on the iPhone to on. Cancel the BLUETOOTH connection with the iPhone and the unit, and reconnect. SongPal operation Application name is mismatched with the actual application in "SongPal". Launch the application again from the "SongPal" application. While running the "SongPal" application via BLUETOOTH, the display automatically switches to [BT AUDIO]. The "SongPal" application or BLUETOOTH function has failed. Run the application again. The "SongPal" application is automatically disconnected when the display switches to [IPD]. The "SongPal" application on iPhone/iPod does not support iPod playback. - Change the source of the unit to other than [IPD], then establish the "SongPal" connection (page 19). Pandora® operation Pandora® connection is not possible. Shut down the Pandora® application on the mobile device, and then launch it again. Messages The following messages may appear or flash during operation. CD ERROR: The disc cannot be played. The disc will be ejected automatically. Clean or insert the disc correctly, or make sure the disc is not blank or defective. CD NO MUSIC: There is no playable file. The disc will be ejected automatically. Insert a disc containing playable files (page 27). CD PUSH EJT: The disc could not be ejected properly. Press (eject). HUB NO SUPRT: USB hubs are not supported. INVALID The selected operation could be invalid. [USB MODE] cannot be changed during iPod playback. IPD STOP: iPod playback has finished. Operate your iPod/iPhone to start playback. NOT SUPPORT - ANDROID MODE A USB device not supporting AOA (Android Open Accessory) 2.0 is connected to the unit while [USB MODE] is set to [ANDROID]. - Set [USB MODE] to [MSC/MTP] (page 22). OVERLOAD: The USB device is overloaded. Disconnect the USB device, then press SRC to select another source. The USB device has a fault, or an unsupported device is connected. READ: Now reading information. Wait until reading is complete and playback starts automatically. This may take some time depending on the file organization. USB ERROR: The USB device cannot be played. Connect the USB device again. 33GB