Sony MEXBT2700 Operating Instructions - Page 16
Music streaming - a2dp
UPC - 027242744899
View all Sony MEXBT2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Making calls In the case of making calls from this unit, redial is used. 1 Press (SOURCE) repeatedly until "BT PHONE" appears. 2 Press and hold (handsfree) for 3 seconds or more. The phone call starts. To end a call Press (handsfree) again, or (OFF). To call another phone, use your cellular phone, and then transfer the call. For call transfer details, check the following. Call transfer In order to activate/deactivate the appropriate device (this unit/cellular phone), check the following. 1 Press and hold (handsfree) or use your cellular phone. For details on cellular phone operation, refer to your cellular phone manual. Note Depending on the cellular phone, handsfree connection may be cut off when call transfer is attempted. Voice Dial Activation You can activate voice dialing with a cellular phone connected to this unit by saying the voice tag stored on the cellular phone, then make a call. 1 Press (SOURCE) repeatedly until "BT PHONE" appears. 2 Press (handsfree). The cellular phone enters voice dialing mode. 3 Say the voice tag stored on the cellular phone. Your voice is recognized, and the call is made. Notes • Check that unit and cellular phone are connected beforehand. • Store a voice tag on your cellular phone beforehand. • If you activate voice dialing with a cellular phone connected to this unit, this function may not always work in some cases. • Noises such as the engine running may interfere with sound recognition. In order to improve recognition, operate under conditions where noise is minimized. • Voice dialing may not work in some situations, depending on the effectiveness of the cellular phone's recognition function. For details, see the support site (page 25). Tips • Speak in the same way as you did when you stored the voice tag. • Store a voice tag while seated in the car, via this unit with "BT PHONE" source selected. Music streaming Listening to music from an audio device You can listen to music of an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth technology. 1 Turn down the volume on this unit. 2 Press (SOURCE) repeatedly until "BT AUDIO" appears. 3 Operate the audio device to start playback. 4 Adjust the volume on this unit. Adjusting the volume level The volume level is adjustable for any difference between the unit and the Bluetooth audio device. 1 Start playback of the Bluetooth audio device at a moderate volume. 2 Set your usual listening volume on the unit. 3 Press the select button repeatedly until "BTA" appears, and rotate the volume control dial to adjust the input level (-8 dB to +18 dB). 16