Sony MEXBT2700 Operating Instructions - Page 17
Deleting registration of all, paired devices, Changing the sound settings - remote
UPC - 027242744899
View all Sony MEXBT2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Operating an audio device with this unit You can perform the following operations on this unit if the audio device supports AVRCP (Audio Video Remote Control Profile) of Bluetooth technology. (The operation differs depending on the audio device.) To Play Pause Skip tracks Press (6) (PAUSE)* on this unit. (6) (PAUSE)* on this unit. SEEK -/+ (./>) [once for each track] * Depending on the device, it may be necessary to press twice. Operations other than the above should be performed on the audio device. Notes • During audio device playback, information such as track number/time, playback status, etc., of a connected audio device is not displayed on this unit. • Even if the source is changed on this unit, playback of the audio device does not stop. Tip You can connect a cellular phone that supports A2DP (Advanced Audio Distribution Profile) as an audio device and listen to music. Deleting registration of all paired devices 1 Press (OFF). This unit is turned off. 2 If " " lights, press and hold (BT) until " " turns off. 3 Press and hold the select button. 4 Press the select button repeatedly until "BT INIT" appears. 5 Press (SEEK) +. Initializing starts. It takes 3 seconds to cancel all registration. Do not turn off the power while "INITIAL" is flashing. Other functions Changing the sound settings Adjusting the sound characteristics 1 Press the select button repeatedly until the desired item appears. 2 Rotate the control dial to adjust the selected item. After 5 seconds, the setting is complete and the display returns to normal play/reception mode. The following items can be set (follow the page reference for details): EQ3 Selects an equalizer curve from 7 music types. LOW*1, MID*1, HI*1 (page 18) BAL (Balance) Adjusts the sound balance between the left and right speakers. FAD (Fader) Adjusts the relative level between the front and rear speakers. SUB*2 (Subwoofer volume) Adjusts the subwoofer volume. ("ATT" is the lowest setting.) AUX*3 (AUX level) Adjusts the volume level for each connected auxiliary equipment: "+18 dB"- "0 dB" - "-8 dB." This setting negates the need to adjust the volume level between sources. BTA*4 (BT-Audio level) Adjusts the volume level for each connected Bluetooth audio device. This setting negates the need to adjust the volume level between sources (page 16). Adjustable level: "+18 dB" - "0 dB" - "-8 dB" *1 When EQ3 is activated. *2 When the audio output is set to "SUB-OUT" (page 18). *3 When AUX source is activated. *4 When Bluetooth audio source is activated (page 16). 17