Sony MEXBT3700U Operating Instructions - Page 16

Operating an iPod directly - Passenger control You can operate an iPod connected to the dock connector directly. 1 During playback, press and hold (MODE). "MODE IPOD" appears and you will be able to operate the iPod directly. To change the display items Press (DSPL). The display items change as follows: Track name t Artist name t Album name t MODE IPOD t Clock To exit the passenger control Press and hold (MODE). Then "MODE AUDIO" will appear and the play mode will change to "RESUMING." Notes • The volume can be adjusted only by the unit. • If this mode is canceled, the repeat setting will be turned off. Bluetooth (Handsfree calling and Music streaming) Bluetooth operations To use the Bluetooth function, the following procedure is necessary. 1 Pairing When connecting Bluetooth devices for the first time, mutual registration is required. This is called "pairing." This registration (pairing) is required only for the first time, as this unit and the other devices will recognize each other automatically from the next time. You can pair up to 8 devices. (Depending on the device, you may need to input a passcode for each connection.) 2 Connection To use the device after pairing is made, start the connection. Sometimes pairing allows to connect automatically. 3 Handsfree calling/Music streaming You can talk handsfree and listen to music when the connection is made. Support site http://esupport.sony.com http://www.xplodsony.com/ Pairing First, register ("pair") a Bluetooth device (cellular phone, etc.) and this unit with each other. You can pair up to 8 devices. Once pairing is established, there is no need for pairing again. 1 Place the Bluetooth device within 1 m (3 ft) of this unit. 2 Press and hold (BT) until " " flashes (about 5 seconds). The unit enters pairing standby mode. flashing 16