Sony MEXBT3700U Operating Instructions - Page 20
Other functions, Changing the sound settings, Adjusting the sound characteristics - bluetooth setup
UPC - 027242744882
View all Sony MEXBT3700U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Other functions Changing the sound settings Adjusting the sound characteristics 1 Press the select button repeatedly until the desired item appears. 2 Rotate the control dial to adjust the selected item. 3 Press (BACK). The setting is complete and the display returns to normal play/reception mode. The following items can be set (follow the page reference for details): EQ3 Selects an equalizer curve from 7 music types. LOW*1, MID*1, HI*1 (page 20) BAL (Balance) Adjusts the sound balance between the left and right speakers. FAD (Fader) Adjusts the relative level between the front and rear speakers. SUB (Subwoofer volume) Adjusts the subwoofer volume. ("ATT" is the lowest setting.) AUX*2 (AUX level) Adjusts the volume level for each connected auxiliary equipment: "+18 dB" - "0 dB" - "-8 dB." This setting negates the need to adjust the volume level between sources. BTA*3 (BT-Audio level) Adjusts the volume level for each connected Bluetooth audio device: "+18 dB" - "0 dB" - "-8 dB." This setting negates the need to adjust the volume level between sources (page 19). *1 When EQ3 is activated. *2 When AUX source is activated. *3 When Bluetooth audio source is activated (page 19). Customizing the equalizer curve - EQ3 "CUSTOM" of EQ3 allows you to make your own equalizer settings. 1 Select a source, then press the select button repeatedly to select "EQ3." 20 2 Rotate the control dial to select "CUSTOM." 3 Press the select button repeatedly until "LOW," "MID" or "HI" appears. 4 Rotate the control dial to adjust the selected item. The volume level is adjustable in 1 dB steps, from -10 dB to +10 dB. Repeat steps 3 and 4 to adjust the equalizer curve. To restore the factory-set equalizer curve, press and hold the select button before the setting is complete. 5 Press (BACK). The setting is complete and the display returns to normal play/reception mode. Tip Other equalizer types are also adjustable. Adjusting setup items - SET 1 Press and hold the select button. The setup display appears. 2 Press the select button repeatedly until the desired item appears. 3 Rotate the control dial to select the setting (example "ON" or "OFF"). 4 Press and hold the select button. The setup is complete and the display returns to normal play/reception mode. Note Displayed items will differ, depending on the source and setting. The following items can be set (follow the page reference for details): CLOCK-ADJ (Clock Adjust) (page 7) BEEP Activates the beep sound: "ON," "OFF." AUX-A*1 (AUX Audio) Activates the AUX source display: "ON," "OFF" (page 21). A.OFF Shuts off automatically after a desired time when the unit is turned off: "NO," "30S (seconds)," "30M (minutes)," "60M (minutes)." MIC*1 - "EXT": to automatically switch to the external microphone when it is connected. - "INT": to select only the internal microphone.