Sony MEXBT5000 Operating Instructions - Page 28

The phone sound quality is poor. Phone sound quality depends on reception conditions of cellular phone. t Move your car to a place where you can enhance the cellular phone's signal if the reception is poor. The volume of the connected audio device is low (high). Volume level will differ depending on the audio device. t Adjust the volume of the connected audio device or this unit. The sound skips during playback of a Bluetooth audio device. • Reduce the distance between the unit and the Bluetooth audio device. • If the Bluetooth audio device is stored in a case which interrupts the signal, remove the audio device from the case while using. • Several Bluetooth devices or other devices which emit radio waves are used nearby. t Turn off the other devices. t Reduce the distance from the other devices. The connected Bluetooth audio device cannot be controlled. Check that the connected Bluetooth audio device supports AVRCP. Some functions do not work. Check that the connecting device supports the functions in question. The name of the other party does not appear when a call is received. • The other party is not stored in the phonebook. t Store in the phonebook (page 16). • The calling phone is not set to send the phone number. A call starts unintentionally. • The connecting phone is set to start a call automatically. • "Auto Answer" of this unit is set to "on" (page 17). Pairing failed in Time Over. Depending on the connecting device, the time limit for pairing may be short. Try completing the pairing within the time by setting a single digit passcode. The ring tone or other party's voice is output only from one speaker. "Speaker Sel" is set to "FR-L" or "FR-R." t Set "Speaker Sel" to "Front" (page 18). No sound is output from the car speakers during handsfree call. If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers. Error displays/Messages Audio function Blank Disc Tracks have not been recorded on the MD. t Play an MD with recorded tracks. Error • The disc is dirty or inserted upside down. t Clean or insert the disc correctly. • The disc cannot play due to a problem. t Insert another disc. Failure (Illuminates until any button is pressed.) The connection of speakers/amplifiers is incorrect. t See the installation guide manual of this model to check the connection. FAILURE (Illuminates for about 1 second.) When the XM tuner is connected, storing an XM radio channel into a preset failed. t Be sure to receive the channel that you want to store, then try it again. Load The changer is loading the disc. t Wait until loading is complete. Local Seek +/- The local seek mode is on during automatic tuning. NO Disc The disc is not inserted in the CD/MD changer. t Insert discs in the changer. NO Disc Name A disc name is not written in the track. NO Group Name A group name is not written in the track on the ATRAC CD. NO ID3 Tag ID3 tag information is not written in the MP3 file. NO Information Text information is not written in the ATRAC3/ ATRAC3plus or WMA file. NO Magazine The disc magazine is not inserted in the CD changer. t Insert the magazine in the changer. NO Music The disc is not a music file. t Insert a music CD in this unit or MP3 playable changer. NO Track Name A track name is not written in the track. Offset There may be an internal malfunction. t Check the connection. If the error indication remains on in the display, consult your nearest Sony dealer. Push Reset The CD unit and CD/MD changer cannot be operated due to a problem. t Press the RESET button (page 6). 28