Sony MEXBT5000 Operating Instructions - Page 6
Getting Started, Resetting the unit, Setting the clock, Detaching the front panel - battery
UPC - 027242694095
View all Sony MEXBT5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Detach the front panel and press the RESET button with a pointed object, such as a ball-point pen. RESET button Note Pressing the RESET button will erase the clock setting and some stored contents. Setting the clock The clock uses a 12-hour digital indication. 1 Press (MENU). 2 Push the joystick up/down until "Setup" appears, then push it right. 3 Push the joystick up/down until "Clock Adjust" appears, then push it right. 4 Push the joystick up/down to set the hour and minutes. To move the digital indication, push the joystick left/right. 5 After setting the clock, press the joystick. The clock starts. Detaching the front panel You can detach the front panel of this unit to prevent theft. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. 1 Press (OFF). The unit is turned off. 2 Press (OPEN). The front panel is flipped down. 3 Slide the front panel to the right, then gently pull out the left end of the front panel. 1 2 Notes • Do not drop or put excessive pressure on the front panel and display window. • Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray. 6