Sony MHC-EC919IP Operating Instructions - Page 13
Tuner, Listening to the radio, Press TUNER MEMORY
View all Sony MHC-EC919IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Tuner Tuner Listening to the radio 1 Select the tuner function (FM/ AM). Press TUNER (or FUNCTION on the unit) repeatedly. 2 Perform tuning. For automatic scanning Press TUNING MODE repeatedly until "AUTO" appears, and then press TUNING+/TUNING. Scanning stops automatically when a station is found. If the scanning does not stop, press to stop scanning, then perform manual tuning (below). For manual tuning Press TUNING MODE repeatedly until "MANUAL" appears, and then press TUNING+/TUNING repeatedly to tune to the desired station. When you tune to a station that provides RDS services, the station name appears on the display (European model only). Tip To reduce static noise on a weak FM stereo station, press REPEAT/FM MODE repeatedly until "MONO" appears to turn off stereo reception. You will lose stereo effect, but reception will improve. Presetting radio stations 1 Tune to the desired station. 2 Press TUNER MEMORY to select the tuner memory mode. 3 Press PRESET+/PRESET repeatedly to select the desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new station. 4 Press to store the station. 5 Repeat steps 1 through 4 to store other stations. You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. To tune to a preset radio station If you registered a radio station to a preset number 1 to 4, the radio station will be tuned in by just pressing the TUNER MEMORY NUMBER (1 to 4) when the system function is set to FM or AM. If you registered a radio station to a preset number 5 or higher, press TUNING MODE repeatedly until "PRESET" appears then press PRESET+/PRESET repeatedly to select the desired preset number. 13GB