Sony MHC-EC919IP Operating Instructions - Page 28
To change the AM tuning interval, except for European model, settings - reset
View all Sony MHC-EC919IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
To change the AM tuning interval (except for European model) The AM tuning interval is preset to 9 kHz or 10 kHz by factory default. Use buttons on the unit to change the AM tuning interval. 1 Tune to any AM station. 2 Hold down OPTIONS on the unit until "530" or "531" appears on the display. All the AM preset stations are erased. To reset the system to factory settings If the system still does not operate properly, reset the system to factory settings. 1 Disconnect and reconnect the power cord, and then turn on the system. 2 Hold down and EQ on the unit until "RESET OK" appears. All user-configured settings, such as preset radio stations, timer, and the clock, are deleted. To turn off the automatic standby function This system is equipped with an automatic standby function. With this function, the system enters standby mode automatically in about 30 minutes when there is no operation or audio signal output. By default, the automatic standby function is turned on. Use buttons on the unit to turn off the automatic standby function. Hold down while the system is on, until "AUTO STANDBY OFF" appears. To turn on the function, repeat the procedure until "AUTO STANDBY ON" appears. Notes The automatic standby function is invalid for the tuner function (FM/AM). The system may not enter standby mode automatically in the following cases: when an audio signal is detected. when an iPod/iPhone is connected. during playback of audio tracks or files. while the preset Play Timer or Sleep Timer is in process. 28GB