Sony MHC-V50 Operating Instructions - Page 35
Enjoying the Party Chain, Setting the Party Chain sound, To select a new Party Host when
View all Sony MHC-V50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Enjoying the Party Chain 1 Plug in the AC power cord (mains lead) and turn on all the systems. 2 Adjust the volume on each system. 3 Activate the Party Chain function on the system to be used as the Party Host. Example: When using this system as the Party Host Touch FUNCTION repeatedly on the unit to select the function you want (except when the AUDIO IN function is used in connection (page 33)). Start playing the music, then touch PARTY CHAIN on the unit. "PARTY CHAIN" appears on the display. The Party Host starts the Party Chain, and other systems become Party Guests automatically. All systems play the same music as that being played by the Party Host. Note ••Depending on the total unit of systems you have connected, Party Guests may take some time to start playing the music. ••Changing the volume level and sound effect on the Party Host will not affect the output on the Party Guests. ••The Party Guest continues playing the music source as Party Host even when you change the function on Party Guest. However, you can adjust the volume and change the sound effect on Party Guest. ••When you use the microphone or play the guitar on Party Host, the sound will not be output from Party Guests. ••When one of the systems in the chain is performing USB transfer, wait for the system to complete or stop the transfer before you activate the Party Chain function. ••For detailed operation on other systems, refer to the operating instructions of the systems. To select a new Party Host (when all the systems are equipped with Party Chain function) Repeat step 3 of "Enjoying the Party Chain" on the system to be used as a new Party Host. The current Party Host becomes Party Guest automatically. All systems play the same music as that being played by the new Party Host. Note ••You can select another system as the new Party Host only after the Party Chain function of all the systems in the Chain has been activated. ••If the selected system does not become a new Party Host after a few seconds, repeat step 3 under "Enjoying the Party Chain". To deactivate the Party Chain Touch PARTY CHAIN on the Party Host. Note If the Party Chain function is not deactivated after a few seconds, touch PARTY CHAIN on the Party Host again. Setting the Party Chain sound mode You can set the sound mode when the Party Chain function is activated. 1 Press OPTIONS. Other Operations 35US