Sony MHC-V50 Operating Instructions - Page 44
Resetting the system, Party Chain
View all Sony MHC-V50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Connection is not possible. •• The BLUETOOTH device you attempted to connect does not support the A2DP profile, and cannot be connected with the system. •• Enable the BLUETOOTH function of the BLUETOOTH device. •• Establish a connection from the BLUETOOTH device. •• The pairing registration information has been erased. Perform the pairing operation again. •• Erase the pairing registration information of the BLUETOOTH device (page 26) and perform the pairing operation again (page 25). The sound skips or fluctuates, or the connection is lost. •• The system and the BLUETOOTH device are too far apart. •• If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. •• If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. The sound of your BLUETOOTH device cannot be heard on this system. •• Increase the volume on your BLUETOOTH device first, then adjust the volume using VOL +/-. 44US There is severe hum, noise, or distorted sound. •• If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. •• If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. •• Turn down the volume of the connected BLUETOOTH device. Party Chain Party Chain function cannot be activated. •• Check the connections (page 33). •• Make sure the audio cables are connected correctly. "PARTY CHAIN" is flashing on the display. •• You cannot select AUDIO IN function if you make connection (page 33) during Party Chain function. Select other function (page 35). •• Touch PARTY CHAIN on the unit. •• Restart the system. Party Chain function does not work properly. •• Turn off the system. Then, turn it back on again to activate the Party Chain function. Resetting the system If the system still does not operate properly, reset the system to factory default settings. Use the keys on the touch panel of the unit to perform this operation. 1 Unplug the AC power cord (mains lead), then plug it back in. 2 Press to turn on the system.