Sony MXD-D3 Users Guide - Page 23
Recording a CD to an MD at High Speed (High-Speed CD Synchro-Recording)
![]() |
View all Sony MXD-D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Recording on MDs Recording a CD to an MD at High Speed (High-Speed CD Synchro-Recording) This function allows you to record a CD to an MD at four times the speed of normal CD Synchro-Recording. ·P CD SYNCHRO HIGH · P § ? 1/u 0 ) ·P p ≠ ± § ≠ ± 0 ) r ·P p 1 Insert a recordable MD. 2 Insert a CD that you want to record. 3 Select the playing mode of the CD (normal play, Program Play, or Repeat Play). 4 Press CD SYNCHRO HIGH. "CD SYNCHRO" appears and "-High-" flashes in the display. The MD deck section stands by for recording and the CD player section stands by for playing. 5 After "CD SYNCHRO" and "-High-" turn off, press · or P on either CD player section or MD deck section. High-speed recording starts. The deck stops automatically after recording. Notes • You cannot record over existing material during High- Speed CD Synchro-Recording. The deck automatically starts recording from the end of the exisiting material. • Make sure that the remaining recordable time on the MD is longer than the playing time of the CD, especially if you want to record all the tracks on the CD. • You cannot pause recording during High-Speed CD Synchro-Recording. • The following items are either inoperative or cannot be used during High-Speed CD Synchro-Recording: - The Smart Space Function and Auto Cut Function. - The recording level specified in the Setup menu. - Recorded signal monitoring. • With the following kinds of CDs, you may experience a reading failure or noise when recorded to an MD: - CDs with adhesive labels attached to them - Irregularly shaped CDs (for example, heart- or star- shaped) - CDs with printed text concentrated on one side only - Old CDs - Scratched CDs - Dirty CDs - Warped CDs • If the following occurs during CD playback or recording, a reading error may occur or noise may be produced in the recorded results: - The CD tray or other part of the deck is bumped. - The deck is placed on an uneven or soft surface. - The deck is located near a speaker, door, or other source of vibration. If "-Retry-" flashes in the display after you press · or P in Step 5 above A reading failure has occurred, and the deck is trying to read the data again. • If the retry was successful, the deck continues with High-Speed CD Synchro-Recording. • If the condition of the inserted CD or the deck is poor, and retry fails, High-Speed CD SynchroRecording is disabled. In this case, the indicator on the CD SYNCHRO NORMAL button flashes and the deck automaticaly starts recording in normal CD Synchro-Recording. Note that monitoring of the recorded signal is not possible when this occurs. To stop recording Press p on the MD deck section. z You can label a track currently being recorded You can use either the controls on the deck or the buttons on the remote (see pages 31 to 34). z You can play back tracks just recorded If "TRACK" lights up in the display when recording has finished, press · immediately to play back from the first track of the material just recorded. 23
![](/manual_guide/products/sony-mxdd3-users-guide-0be4e79/23.png)