Sony MXD-D3 Users Guide - Page 38

Additional Information Specifications CD player section System Laser Laser output Frequency response Signal-to-noise ratio Wow and flutter Compact Disc digital audio system Semiconductor laser (λ = 780 nm) Emission duration: continuous Less than 44.6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. 5 to 20,000 Hz ±0.5 dB More than 98 dB Below measurable limit MD deck section System Disc Laser Laser output Laser diode properties Revolutions (CLV) Error correction Sampling frequency Coding Modulation system Number of channels Frequency response Signal-to-noise ratio Wow and flutter MiniDisc digital audio system MiniDisc Semiconductor laser (λ = 780 nm) Emission duration: continuous Less than 44.6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Material: GaAlAs 800 rpm to 1,800 rpm Advanced Cross Interleave Reed Solomon Code (ACIRC) 44.1 kHz Adaptive Transform Acoustic Coding (ATRAC) EFM (Eight-to-Fourteen Modulation) 2 stereo channels 5 to 20,000 Hz ±0.5 dB Over 98 dB during playback Below measurable limit General Power requirements Where purchased U.S.A. and Canada Europe Certain countries in Asia Other countries Power requirements 120 V AC, 60 Hz 220 - 230 V AC, 50/60 Hz 220 - 240 V AC, 50/60 Hz 110 - 120 or 220 - 240 V AC selectable, 50/60 Hz Power consumption Where purchased U.S.A. and Canada Europe Other countries Power consumption 20 W (less than 1 W at standby) 20 W (less than 1 W at standby) 22 W (less than 1.2 W at standby) Dimensions (approx.) (w/h/d) incl. projecting parts and controls 430 × 120 × 290 mm Mass (approx.) 4.7 kg Supplied accessories See page 4. US and foreign patents licensed from Dolby Laboratories Licensing Corporation. Design and specifications are subject to change without notice. Inputs Jack type Input Rated input Minimum impedance input LINE (ANALOG) Phono IN jacks 47 kilohms 500 mVrms 125 mVrms DIGITAL Square Optical wave OPTICAL IN optical length: connector 660 nm - - jack Outputs Jack type Rated output Load impedance PHONES Stereo phone 10 mW jack 32 ohms LINE (ANALOG) Phono jacks 2 Vrms Over 10 kilohms OUT (at 50 kilohms) 38