Sony MZ-R55 Operating Instructions - Page 24
Labeling, recordings
![]() |
View all Sony MZ-R55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Labeling recordings You can name tracks during playback, discs during stop, and both during recording. Each name can be as long as 200 letters. Each disc can hold up to 1700 alphanumeric letters during playback or stop, and 500 alphanumeric letters during one recording. On the recorder MODE DISPLAY I-444 INP.1 EDIT/ENTER VOLUME +/- T MARK Labeling a disc during stop 1 Insert a disc. To label a disc that is already in the recorder, press II to stop. 2 Press EDIT/ENTER. " (5). : Name" flashes in the display. 3 Press EDIT/ENTER again. The disc is ready to be labeled. 4 Press IN or IIIN*I repeatedly to select a letter and press OP" to enter. The selected letter stops flashing and the cursor moves to the next input position. Press To 11 Switch between capital letters, small letters, and marks / numbers. VOLUME +/- Move the cursor to the left or right. 1141 /110*1 Change the letter to the one before / next one. DISPLAY Insert a blank space to type in a new letter. MODE • Delete a letter and move back all following letters to the left. Cancel labeling. T MARK Cancel labeling. 5 Repeat step 4 and enter all characters of the label name. 6 Press EDIT/ENTER. The track or disc is labeled. Labeling a track during playback 1 Insert a disc and play the track you want to label. 2 Press EDIT/ENTER. " 4,r; : Name" flashes in the display. 3 Press EDIT/ENTER again. The track is ready to be labeled. 4 Follow steps 4 to 6 of "Labeling a disc during stop" above. Labeling a track or a disc during recording Press EDIT/ENTER during recording. " : Name" flashes in the display. 24
![](/manual_guide/products/sony-mzr55-operating-instructions-378f25c/24.png)