Sony MZ-R55 Operating Instructions - Page 7

Press, slide, right, record.

Page 7 highlights

Record an MD. ® Press and slide REC to the right . "REC" lights up and recording starts. C> REC CD player, cassette recorder, etc. (source) ® Play the CD or tape you want to record. To stop recording, press ■. "Data Save" or "Toc Edit" flashes while data of the recording (the track's start and end points, etc.) is being recorded. Do not move or jog the recorder or disconnect the power source while the indication is flashing in the display. To Press Pause Record from the end of the previous recording Press II again to resume recording. END SEARCH and slide REC. Record partway through the previous recording. Remove the MD. or IN to find the start point of recording and press ■ to stop. Then slide REC. ■ and open the lid.2) I) A track mark is added at the point where you press II; thus the remainder of the track will be counted as a new track. 2) Once you open the lid, the point to start recording will change to the beginning of the first track. Check the point to start recording on the display. If the recording does not start • Make sure the recorder is not locked (page 20). • Make sure the MD is not record-protected (page 30). • Premastered MDs cannot be recorded over. Note If the power supply is disrupted (i.e. the battery is removed or becomes exhausted or the AC power adaptor is disconnected) when the recorder is operating, the lid will not open until the power is restored. •The level of the recorded sound is adjusted automatically. • You can monitor the sound during recording. -Connect the supplied headphones with remote control to 0/ REMOTE and adjust the volume by pressing VOLUME +/- (VOL +/- on the remote control). This does not affect the recording level. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

R
ecord
an
MD.
C>
REC
CD
player,
cassette
recorder,
etc.
(source)
®
Press
and
slide
REC
to
the
right
.
"REC"
lights
up
and
recording
starts.
®
Play
the
CD
or
tape
you
want
to
record.
To
stop
recording,
press
■.
"Data
Save"
or
"Toc
Edit"
fl
ashes
while
data
of
the
recording
(the
track's
start
and
end
points,
etc.)
is
being
recorded.
Do
not
move
or
jog
the
recorder
or
disconnect
the
power
source
while
the
indication
is
fl
ashing
in
the
display.
To
Press
Pause
Press
II
again
to
resume
recording.
Record
from
the
end
of
the
previous
recording
END
SEARCH
and
slide
REC.
Record
partway
through
the
previous
recording.
or
IN
to
find
the
start
point
of
recording
and
press
to
stop.
Then
slide
REC.
Remove
the
MD.
and
open
the
lid.
2)
I)
2)
A
track
mark
is
added
at
the
point
where
you
press
II;
thus
the
remainder
of
the
track
will
be
counted
as
a
new
track.
Once
you
open
the
lid,
the
point
to
start
recording
will
change
to
the
beginning
of
the
first
track.
Check
the
point
to
start
recording
on
the
display.
If
the
recording
does
not
start
Make
sure
the
recorder
is
not
locked
(page
20).
Make
sure
the
MD
is
not
record
-protected
(page
30).
Premastered
MDs
cannot
be
recorded
over.
Note
If
the
power
supply
is
disrupted
(i.e.
the
battery
is
removed
or
becomes
exhausted
or
the
AC
power
adaptor
is
disconnected)
when
the
recorder
is
operating,
the
lid
will
not
open
until
the
power
is
restored.
•The
level
of
the
recorded
sound
is
adjusted
automatically.
You
can
monitor
the
sound
during
recording.
-
Connect
the
supplied
headphones
with
remote
control
to
0/
REMOTE
and
adjust
the
volume
by
pressing
VOLUME
+/-
(VOL
+/-
on
the
remote
control).
This
does
not
affect
the
recording
level.
7