Sony NAC-SV10i Operating Instructions - Page 57
Using the Play Timer, To go back to the previous display, To cancel the timer setting
UPC - 027242786257
View all Sony NAC-SV10i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Additional information Using the Play Timer You can set the Play Timer to start playing an iPod/iPhone or a music service at a specified time (Play Timer function). Make sure you have set the clock. 1 Set the source selector on the amplifier to the setting for this unit. 2 Prepare the sound source. Select the sound source (iPod/iPhone or Music Services), and then adjust the volume on the amplifier (you can use AMP VOL +/- to control the Sony amplifier). For details on the remote control settings required to operate the Sony amplifier, see "Setting up the Sony amplifier" (page 19). 3 Press TIMER. 4 When "TIMER Setting" appears, press ENTER. The "Start Time" setting display appears, and the "cPLAY" indicator starts flashing rapidly. 7 Select the source ("iPod & iPhone" or "MUSIC SERVICES") you want to play. When the Play Timer is set, "Complete." appears, and the "cPLAY" indicator lights up on the display. 8 Press ?/1 to enter the standby mode. To go back to the previous display Press BACK before you select the sound source in step 7. To cancel the timer setting While the Play Timer is set, press TIMER. When "TIMER Off" appears on the display, press ENTER. Notes • Make sure that the power of the connected amplifier is turned on when the Play Timer starts. • The Play Timer is erased if you format the system (page 60). • If the unit is already turned on at the preset starting time, the Play Timer will not be activated. • The Play Timer may not be activated depending on the status of the connected iPod/iPhone. • If you select the Music Services function as the sound source, the sound may not be output, depending on the service provider or the network environment. 5 Set the starting time. Press M/m to change the hour and press ,. The cursor moves to the minute setting. Perform the same operation to set the minute. Press