Sony NEX-C3 Instruction Manual - Page 75
On the Smart Accessory, On the grip - body
View all Sony NEX-C3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
On using the lenses and accessories It is recommended that you use Sony lenses/accessories designed to suit the characteristics of this camera. Using the products of other manufacturers may cause the camera not to operate to its capability, or result in accidents and malfunctions of the camera. On the Smart Accessory Terminal Set the power switch of the camera to OFF before you attach or remove an accessory, such as the flash, to the Smart Accessory Terminal. When attaching an accessory, plug the accessory into the Smart Accessory Terminal to the end and fasten the screw. Make sure that the accessory is attached to the camera securely. Do not use/store the camera in the following places • In an extremely hot, dry or humid place In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction. • Storing under direct sunlight or near a heater The camera body may become discolored or deformed, and this may cause a malfunction. • In a location subject to rocking vibration • Near strong magnetic place • In sandy or dusty places Be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired. On the grip The grip is applied with a special coating. It may be discolored if it is rubbed with dark colored cloth, leather, etc. On storing Be sure to attach the front lens cap when not using the camera. On the temperature of the camera When you continue to use the camera for a long time, the camera or the battery pack may become hot. This is not a malfunction. On operating temperatures Your camera is designed for use under the temperatures between 0°C and 40°C (32°F and 104°F). Shooting in extremely cold or hot places that exceed this range is not recommended. On moisture condensation If the camera is brought directly from a cold to a warm location, moisture may condense inside or outside the camera. This moisture condensation may cause a malfunction of the camera. How to prevent moisture condensation When bringing the camera from a cold place to a warm place, seal the camera in a plastic bag and allow it to adapt to conditions at the new location over about an hour. GB 75 Others