Sony NW-A1200 Operation Guide - Page 77
AVLS Vol. Limit is set to On. Set it to Off - volume button
View all Sony NW-A1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
77 Troubleshooting Table of Contents Menu Index Sound Symptom There is no sound. Noise is heard. The volume does not increase. There is no sound from the right channel of the headphones. The volume cannot be adjusted. When using the player with a stereo system connected, the sound is distorted or noisy. Cause or corrective action The volume level is set to zero. Turn up the volume ( page 8). The headphone plug is not connected properly. Connect it firmly to the (headphones) jack ( page 8). The headphone plug is dirty. Clean the headphone plug with a soft dry cloth. No audio data is stored on the hard disk. "AVLS (Vol. Limit)" is set to "On." Set it to "Off" ( page 51). The headphone plug is not connected properly. Connect it firmly to the (headphones) jack ( page 8). "Audio Output" is set to "Line Out." Adjust the volume using the volume control on the connected device, or set "Audio Output" to "Headphone" ( page 53). "Audio Output" is set to "Headphone." Set it to "Line Out" ( page 53). Operation/Playback Symptom Buttons do not work. Cause or corrective action The buttons are locked. Press and hold the HOLD button for a few seconds to unlock it ( page 8). Press any button other than the HOLD button. The HOLD message appears when you press any button other than the HOLD button to turn on the player when the player is turned off with HOLD set to on. Press and hold the HOLD button while the message is displayed to disable the HOLD feature and activate the controls. Moisture has condensed inside the player if the player is brought directly from a cold environment to a warm environment. Set the player aside for a few hours to allow the moisture to evaporate. The remaining battery power is insufficient to operate the player. Charge the battery ( page 66). Continued