Sony NW-S705F Operation Guide - Page 90
The player's USB connection USB Bus Powered is, Set the USB Bus Powered to Low - problems
View all Sony NW-S705F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
90 Troubleshooting Table of Contents Menu Index Connection with the computer/SonicStage (continued) Symptom "USB CONNECT" does not appear when connected to the computer with the supplied USB cable. The player is not recognized by the computer when it is connected to the computer. Cause/Remedy The USB cable is not connected to a USB port on your computer properly. Disconnect the USB cable, and then reconnect it. Use the supplied USB cable. A USB hub is being used. Connecting the player via a USB hub may not work. Connect the player directly to the computer. Please wait for the authentication of the SonicStage software. Another application is running on the computer. Disconnect the USB cable, wait a few minutes, and reconnect it. If the problem persists, disconnect the USB cable, restart the computer, and then reconnect the USB cable. The player's USB connection (USB Bus Powered) is set to "High-Power500mA." Set the "USB Bus Powered" to "LowPower100mA" ( page 59). The installation of the SonicStage software was not successful. Disconnect the player from your computer, and reinstall the software using the supplied CDROM ( "Quick Start Guide"). Audio files registered with the earlier installation will be available with the new SonicStage installation. The USB cable is not connected to a USB port on your computer properly. Disconnect the USB cable, and then reconnect it. A USB hub is being used. Connecting the player via a USB hub may not work. Connect the player directly to the computer. Continued