Sony NW-S705F Operation Guide - Page 98
computer using SonicStage while the player is connected to
View all Sony NW-S705F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
98 Troubleshooting...Messages Table of Contents Menu Index Message UPDATE ERROR USB CONNECT USE ORIGINAL HEADPHONE (NW-S703F/S705F/S706F only) Meaning Remedy The player fails to update the firmware. Follow the on-screen instructions on the computer and update again. The player is connected to This is not a malfunction. a computer. You can operate the player using SonicStage, but you cannot operate the controls on the player. The following functions were used when the headphones corresponding to the Noise Canceling function were not connected. Noise Canceling ( page 28) Noise Cancel Control setting ( page 38) Connect the supplied headphones or headphones corresponding to the Noise Canceling functions. To delete abnormal data from the built-in flash memory If "CANNOT PLAY," "DRM ERROR," "EXPIRED," "FILE ERROR," "FORMAT ERROR," "MEMORY ERROR," or "NO DATABASE" appears, there is a problem with all or part of the data stored in the built-in flash memory. Please follow the procedure below to erase data you cannot play. 1 Connect the player to the computer, and start SonicStage. 2 If you have already specified the data with problems, erase the data using SonicStage. 3 If the problem persists, transfer all data without problems back to the computer using SonicStage while the player is connected to the computer. 4 Disconnect the player from the computer and then format the built-in flash memory using the "Format" menu ( page 57).