Sony NXLIP55 User Manual (NXL-IP55 Operations Manual) - Page 20
Operation, Starting Video Transmission, Outputting Color Bars and Tone Signal, Displaying the Status
View all Sony NXLIP55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Operation Starting Video Transmission There are two ways to start video transmission. Automatic connection When both NXL-IP55 units connected via a network start up, they automatically connect and transmission starts. To enable automatic connection, select the [Auto Connection] checkbox under [Connection] on the [Operator] page of the web menu. Manual connection Connection is established via manual user operations. 1 Open the [Operator] page in the web menu, clear the [Connection] > [Auto Connection] checkbox, and then click the [Apply] button. 2 Check that the other NXL-IP55 unit has started, and then click the [Connect] button on the [Operator] page. Outputting Color Bars and Tone Signal Color bars and tone signal can be output to each HD SDI OUT connector. Settings are configured using [Color Bars] on the [Operator] page. • [Color Bars ON]: Place a check mark in [SDI in 1] to [SDI in 3] to enable transfer of color bars. Color bars are output from the output connectors of the unit and the partner unit corresponding to the selected input signal. To switch the output connector signals to color bars, place a check mark in [SDI out 1] to [SDI out 4] or [Monitor out]. • [Color Bars Select]: Select the type of color bars you want to output. • [Tone Level]: Set the level of the tone signal added to the color bars. The setting is in dBFS units. Select "-∞" to disable the tone signal. When finished changing settings, click the [Apply] to apply the settings. Displaying the Status The status of this unit can be output to the web menu or to a monitor display. Web menu display The status of the unit is displayed on the [Status] page of the web menu. Password entry is not required to display the [Status] page. To update the displayed content, click the [Refresh] button. Monitor display This status of this unit can be displayed on an external monitor connected to HD SDI OUT connector M. To display the status, select the [Character Display] checkbox under [Monitor out] on the [Operator] page of the web menu. Note Even if the checkbox is not selected, the IP address of the CONTROL connector will be displayed at startup. This allows you to verify settings, even if you forgot the unit's IP address. 20 Operation