Sony NXLIP55 User Manual (NXL-IP55 Operations Manual) - Page 22

Item 1. Gen Lock Source Status Reference out Signal Frame Synchronizer 2. Video Input Input Phase SDI in 1 SDI in 2 SDI in 3 3. Audio Input Audio Control Packet SDI in 1 SDI in 2 SDI in 3 4. System Status Main Video Direction Structure Network GenLock Video Format Signal Direction Tally GPIO Group 1 GPIO Group 2 Structure Settings Network Settings Firmware Version 5. Stream Video Stream Video Stream 1 Video Stream 2 Video Stream 3 Video Stream 4 Audio Stream Audio Stream 1,2 Audio Stream 3,4 Audio Stream 5,6 Audio Stream 7,8 Audio Stream 9,10 Description Displays the input source of the synchronization signal. Displays the synchronization status. Displays the reference output type. Displays the operating mode of the frame synchronizer. Displays the phase and status of the signal input to HD SDI IN connector 1. Displays the phase and status of the signal input to HD SDI IN connector 2. Displays the phase and status of the signal input to HD SDI IN connector 3. Displays the sampling rate of the HD SDI IN connector 1 audio control packets, asx (synchronous/asynchronous audio), and ACT (active channel). Displays the sampling rate of the HD SDI IN connector 2 audio control packets, asx (synchronous/asynchronous audio), and ACT (active channel). Displays the sampling rate of the HD SDI IN connector 3 audio control packets, asx (synchronous/asynchronous audio), and ACT (active channel). Displays the transmission direction of the main line signal. Displays the transmission mode. Displays the Leader/Follower of network synchronization. Displays the format of the video signal. Displays the transmission direction of the tally signal. Displays the transmission direction of the GPIO Group 1 signal. Displays the transmission direction of the GPIO Group 2 signal. During the connection process, "OK" appears here when the settings on the partner unit's [Structure] page are correct, and "Error" appears when any of the settings are not correct. During the connection process, "OK" appears here when the settings on the partner unit's [Network] page are correct, and "Error" appears when any of the settings are not correct. Displays version information if the firmware versions of the unit and partner device do not match. Displays the video signal source of video stream 1. Displays the video signal source of video stream 2. Displays the video signal source of video stream 3. Displays the video signal source of video stream 4. Displays the audio signal source of audio streams 1 and 2. Displays the audio signal source of audio streams 3 and 4. Displays the audio signal source of audio streams 5 and 6. Displays the audio signal source of audio streams 7 and 8. Displays the audio signal source of audio streams 9 and 10. 22 Menus