Sony NXLIP55 User Manual (NXL-IP55 Operations Manual) - Page 25

Item 3. Color Bars Color Bars ON SDI in 1 SDI in 2 SDI in 3 SDI out 1 SDI out 2 SDI out 3 SDI out 4 Monitor out Color Bars Select Full / SMPTE Moving Tone Level 4. Operation Manual Language Select View Operation Manual (PDF) 5. License Information View License Information Apply Description Target Switches the signal corresponding to the HD SDI IN connector 1 input to color Y bars with tone signal. This is disabled under default settings. Switches the signal corresponding to the HD SDI IN connector 2 input to color Y bars with tone signal. This is disabled under default settings. Switches the signal corresponding to the HD SDI IN connector 3 input to color Y bars with tone signal. This is disabled under default settings. Switches the output from HD SDI OUT connector 1 to color bars. This is Y disabled under default settings. Switches the output from HD SDI OUT connector 2 to color bars. This is Y disabled under default settings. Switches the output from HD SDI OUT connector 3 to color bars. This is Y disabled under default settings. Switches the output from HD SDI OUT connector 4 to color bars. This is Y disabled under default settings. Switches the output from HD SDI OUT connector M to color bars. This is Y disabled under default settings. Selects the color bars type. Y Full / SMPTE Specifies whether the color bars move. This is disabled under default settings. Y Sets the audio level of the tone signal added to the color bars. Y 0 / -16 / -18 / -20 / -22 / -24 / -∞ (dBFS) Selects the language of the operation manual. N Click this to display the operation manual in the selected language. N Displays detailed license information and a list of software packages. N Click this after modifying the settings to apply them. [I/O] Page Item Apply 1. SDI out SDI out 1 SDI out 2 SDI out 3 SDI out 4 Description Click this after modifying the settings to apply them. Target Selects the signal to be output from each HD SDI OUT connector. The initial Y value for selectable signals differs depending on the [Transmission Settings] on the [Structure] page. Y SDI in 1: Outputs the signal that corresponds to the input of HD SDI IN Y connector 1. SDI in 2: Outputs the signal that corresponds to the input of HD SDI IN Y connector 2. SDI in 3: Outputs the signal that corresponds to the input of HD SDI IN connector 3. Opposite SDI in 1: Outputs the signal that corresponds to the input of the partner unit's HD SDI IN connector 1. Opposite SDI in 2: Outputs the signal that corresponds to the input of the partner unit's HD SDI IN connector 2. Opposite SDI in 3: Outputs the signal that corresponds to the input of the partner unit's HD SDI IN connector 3. -: Outputs a black screen. Menus 25