Sony NXLIP55 User Manual (NXL-IP55 Operations Manual) - Page 32

Item Description Target 2. Control Port Configuration DHCP Selects whether to use DHCP to configure the CONTROL connector's IP N address. This is disabled under default settings. IP Address When the DHCP is disabled, this specifies the IP address. The default setting is N 192.168.0.3. Subnet Mask When the DHCP is disabled, this specifies the subnet mask. The default setting N is 255.255.255.0. Default Gateway When the DHCP is disabled, this specifies the default gateway. The default N setting is 192.168.0.253. 3. Network Test Test mode Select this checkbox to test the network environment. Select the [Test mode] N checkbox for the partner unit as well. This is disabled under default settings. Run Starts the network environment test. N Test result Displays the test results. N Physical link Test result for the physical interface. N MAC address resolution Test result for the MAIN connector's MAC address on the partner unit. N ICMP Echo/Reply Test result for the MAIN connector's IP address and ICMP echo on the partner N unit. Network Genlock Network synchronization status. This appears only on the Follower side. N Packet delay Average delay time for received packets. This appears only on the Follower side. N Packet delay jitter Difference between the shortest delay and longest delay for received packets. N This appears only on the Follower side. Packet loss Number of received video packet errors and number of packets lost during the N test, and the total number since the unit was turned on. Throughput (informative) Bit rate of the video packets received during the test (reference value), and the N total byte count of the received packets. Apply Click this after modifying the settings to apply them. [Others] Page Item Apply 1. Device Name 2. User Name and Password Change Select Items User Name Password User Name New User Name Password New Password Retype New Password 3. Setting Restore Create a System Restore point Undo System Changes with System Restore Undo System Changes with Default Settings Description Click this after modifying the settings to apply them. Specifies the name of this unit. This name is displayed in the title of the web menu. The default setting is [Sony IP Live Production Unit]. Target Y Selects the item to be changed. Select this checkbox to change the user name. The default setting is [Users]. N Select this checkbox to change the password. The default setting is [NXL-IP55]. N Displays the current user name. N Enter the new user name. N Enter the current password. N Enter the new password. N Reenter the new password. N Saves the current settings as the restore point. N Select this checkbox, and click the [Create] button. Returns the unit's settings to the restore point conditions. N Select this checkbox, and click the [Restore] button. Returns the unit's settings to the default settings. N Select this checkbox, and click the [Default] button. 32 Menus