Sony PCV-J200 System Reference Manual - Page 38
Installing an Add-In Card, Removing the Side Panel, Removing a Slot Cover
View all Sony PCV-J200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
26 VAIO® System Reference Manual Installing an Add-In Card ! Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral devices, shut down the computer, and unplug the power cord. 1 Remove the side panel (see "Removing the Side Panel" on page 22). 2 Locate an available expansion slot connector. 3 Remove the slot cover adjacent to the selected slot connector (see "Removing a Slot Cover" on page 39). 4 Insert the add-in card into the PCI slot connector. Use a gentle rocking motion, pressing down until the card is fully seated. ✍ Align the card's bracket so that the bottom of the bracket fits into the slot at the bottom of the chassis. Check that the top of the bracket fits snugly against the chassis lip after the card is fully inserted. 5 Replace the screw that secures the card. 6 Attach any necessary cables to the card (see the instructions that came with the add-in card). 7 Replace the side panel (see "Replacing the Side Panel" on page 25). 8 Turn on the computer, and follow any instructions that came with the add-in card.