Sony PCV-J200 System Reference Manual - Page 50
Reconnect the power cord, and turn on the computer.
View all Sony PCV-J200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
38 VAIO® System Reference Manual 10 Press down firmly and evenly at both corners until the module is fully seated. ✍ When the module is fully seated, the latches on each side are straight up and locked into the slot on each side of the module. If the latches are not completely straight upright, continue to press down on each side of the module until the latches lock into place. 11 Replace the power supply by sliding it down the rails on each side of the chassis opening until the metal tab on the power supply slips into the slot in the CD-RW/DVD combo drive. Tab fits into slot in CD-RW/DVD combo drive 12 Replace the side panel (see "Replacing the Side Panel" on page 25). 13 Reconnect the power cord, and turn on the computer. Your computer automatically recognizes the extra memory and will configure itself accordingly when you turn on the computer. No further action is required.