Sony PCWA-A500 Operating Instructions - Page 13
To return the Access Point settings to the factory default settings, MAC address
![]() |
View all Sony PCWA-A500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting started To return the Access Point settings to the factory default settings To return the Access Point settings to the factory default settings, hold down the factory default switch for approximately one second while the power of the Access Point is ON. For information on the location of the factory default switch position, see "Names of parts and functions" on page 9. About the indicator display When you press the factory default switch, the MESSAGE indicator flashes orange. If you continue to press this switch, the WIRELESS, NETWORK 1, and NETWORK 2 indicators flash green, and the operation to return the Access Point settings to the factory default settings begins. When the indicators stop flashing, the Access Point settings have been returned to the factory default settings. For setting details, see page 12. Note If you perform this procedure, all previously set data will be lost. MAC address You can check the MAC address for the Access Point NETWORK 1 connector on the Status Display screen. For details, see "Confirming the status of the Access Point" (page 21). 13
![](/manual_guide/products/sony-pcwaa500-operating-instructions-fee090d/13.png)