Sony RCD-W2000ES Operating Instructions (primary manual) - Page 29

Recording/Editing Marking Track Numbers While Recording You can mark track numbers either manually or automatically. By marking track numbers at specific points, you can quickly locate the points later using the AMS Function or Editing Functions. When using the remote, set DECK A/DECK B to DECK B. REC z DECK A/DECK B REC z Marking track numbers automatically (Track Marking Function) The unit adds track marks differently in the following cases: • When you make a Synchro-Recording (page 23) The unit marks track numbers automatically under the control of DECK A. • When recording from DECK A, or from a CD or MD connected through the DIGITAL OPTICAL IN or DIGITAL COAXIAL IN jack (with "OPT" or "COAX" selected by the INPUT button) The unit marks track numbers automatically according to the information contained in the source being recorded. However, the unit may not automatically mark track numbers when recording from some CD players and multi disc players. • In all other cases When "Track Mark" is set to "LSync" in menu, the unit marks a new track number whenever the signal drops to the specified level* or below for about 1.5 seconds or longer, then rises to a specified level. * The initial setting is -50 dB. To turn off the Track Mark Function While the unit is stopped, set "Track Mark" in menu to "Off." For details, see "Using the Menu" (page 36). To change the trigger level for Track Marking Function (Level Sync function) While the unit is stopped, select "LSync Lvl" in the menu and set the level between -72 dB and -20 dB. For details, see "Using the Menu" (page 36). Marking track numbers manually You can mark track numbers at any time while recording. Press REC z at the point you want to add a track mark. Notes • You cannot mark track numbers manually during Synchro-Recording. • Track length must be at least 4 seconds to mark track numbers manually. 29