Sony RCD-W2000ES Operating Instructions (primary manual) - Page 8

Basic Operations Playing a CD This unit has two decks. In this manual, the CD player section is just called DECK A, and the CD-R and CD-RW recording section is called DECK B. When using the remote, set DECK A/DECK B to DECK A to operate DECK A (the CD player section), or to DECK B to operate DECK B (the CD-R or CD-RW recording section). POWER DISC 1-5 A OPEN/CLOSE N x AMS X PLAY MODE AMS X x N PLAY MODE DECK A/DECK B PLAY MODE H X x ./> DISC SKIP 1 Turn on your amplifier and adjust the volume to the minimum. 2 Set your amplifier's input selector to select this unit. 3 Press POWER. 4 Press OPEN/CLOSE (or one of the DISC 1-5 A buttons for DECK A) and place a disc on the inner circle of DECK A (or B). Press OPEN/CLOSE (or A) again to close the disc tray. With the label side up 5 For DECK A, press PLAY MODE repeatedly to select the Continuous play mode. When you select ALL DISCS 1 DISC/ ALBUM The unit plays All discs in the unit consecutively in the order of the disc number. Only one disc you have selected. 6 Press N (or H on the remote). The unit starts playing. Adjust the volume on the amplifier. To Do the following: Stop playback Press x. Pause playing Press X. Press the button again or press N (or H on the remote) to resume playing. Select the disc (for DECK A) Press one of the DISC 1-5 buttons. Go to the next disc Press DISC SKIP on the remote. (for DECK A) Z Go to the next track Turn AMS* clockwise while the ALBUM SELECT indicator in the display is turned off (or press > on the remote ). Go to the beginning of the current track or the preceding track Turn AMS counterclockwise while the ALBUM SELECT indicator in the display is turned off (or press . on the remote). Remove the disc Press OPEN/CLOSE (or A), whichever contains the disc you want to remove after stopping play. *AMS: Automatic Music Sensor 8