Sony RDHSK8IP Operating Instructions - Page 16
Precautions, Optional components - canada
View all Sony RDHSK8IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Optional components There is no sound. • Make sure you press the POWER on the back panel. • Press VOL + (or VOLUME + on the unit) repeatedly or adjust the volume on the connected component. • Connect the component properly while checking: - if the cords are connected properly. - if the cord plugs are firmly inserted all the way. • Turn on the connected component. • Refer to the operating instructions supplied with the connected component and start playing. 16GB Precautions On safety • Completely disconnect the AC power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. • Should any solid object or liquid get into the unit, unplug the unit, and have it checked by qualified personnel before operating it again. • (For customers in United States and Canada only) One blade of the plug is wider than other for the purpose of safety and will fit to the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. • The AC power cord (mains lead) can be changed only by a qualified service facility. On placement • Do not place the unit in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. • Place the unit a few centimeters away from the wall to avoid blocking the ventilation holes. • Be careful when placing the unit on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. • Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring-wound watches away from the unit to prevent possible damage from the magnet. On heat buildup • Heat buildup on the unit during operation is normal and is not a cause for alarm. • Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. • Do not obstruct the ventilation holes. Cleaning the cabinet Clean this unit with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol.