Sony RM-AX1400 Operating Instructions - Page 11
Connecting the Remote Commander to your PC - usb driver
UPC - 027242677043
View all Sony RM-AX1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
For Windows 2000 users 1 Close all software running on Windows. 2 Insert the supplied CD-ROM into the CD-ROM drive of the PC. After a moment, "RM-AX1400 Install CD Menu" appears. 3 Click [Exit] to close "RM-AX1400 Install CD Menu." 4 Connect the PC and the Remote Commander using the supplied Dedicated USB cable (page 11). "Found New Hardware" appears. After a moment, "Found New Hardware Wizard" appears. 5 Click [Next]. "Install Hardware Device Drivers" appears. 6 Select "Search for a suitable driver for my device [recommended]", then click [Next]. "Locate Driver Files" appears. 7 Mark only the check box of "CD- ROM drives", then click [Next]. "Driver Files Search Results" appears, and the found driver is displayed. 8 Click [Next]. Installing of the USB driver starts. "Completing the Found New Hardware Wizard" appears when the installation is complete. 9 Click [Finish]. Installing of the USB driver finishes. Connecting the Remote Commander to your PC You can now connect the Remote Commander to your PC with the supplied Dedicated USB cable. Connect whenever you want to verify correct operation of button commands for an XPRESS function, etc., or to exchange setup data between your PC and the Remote Commander. IMPORTANT Do not keep the Remote Commander connected to the PC when the PC is in standby/hibernation, otherwise, a malfunction could occur. Be sure to disconnect the Remote Commander from the PC before standby/hibernation begins. Furthermore, do not connect the Remote Commander to the PC while it is in standby/hibernation. Wait until the PC comes out of standby/hibernation before connecting. Notes • The Remote Commander uses the battery when connected to the PC. When you finish the setup, unplug from the USB connector. • If "E" is shown in the display, the Remote Commander cannot be recognized on your PC. Before connecting the Remote Commander to your PC, be sure to install fresh batteries in the Remote Commander. • Do not disconnect the Dedicated USB cable from your PC while your PC is communicating with the Remote Commander, as a malfunction may occur. • Only connect one Remote Commander to your PC at a time. Otherwise, you will not be able to download the settings correctly. Getting Started Continued 11