Sony RM-VL610A Operating Instructions (RM-VL610A Remote Commander®) - Page 10
Basic Operations
View all Sony RM-VL610A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Basic Operations Setting the Code for non-Sony Preset Audio and Visual Components - Setting component codes The Commander is preset at the factory to operate Sony brand AV components (see the table below). If you are using the Commander with a factory-set Sony components, skip the following procedures. You can use the Commander with other major brand preset AV components also. To use with other AV components, or Sony components which do not function with the Commander, you need to follow the procedures to set the correct codes for each component. Component Select Button TV DVD SAT CBL VCR CD TAPE AMP Preset Factory setting component(s) TV TV/VCR Combo Sony TV DVD player Sony DVD player Satellite tuner Sony satellite tuner Cable box Sony cable box VCR Sony VHS VCR CD player Sony CD player Cassette deck Sony cassette deck Amplifier Sony amplifier Note An MD player and a DAV can be set to any of the above Component Select buttons. You can assign Component Select buttons to freely set signals of your desired components. For further information, see "Assigning Other Components to the Component Select Buttons" (page 33) . For the functions of buttons as for each component, see "Table of Preset Functions" (page 39). Setting a component code Example: To set up a manufacturer's CD 1 See the tables in the supplied "Component Code Numbers," and find the four-digit component code number for the desired component. If more than one code number is listed, use the number that is listed first. 2 Press and while holding SET, press MENU. The SET indicator lights up. 10