Sony RM-VL610A Operating Instructions (RM-VL610A Remote Commander®) - Page 14

Setting a Component Code by the Search Function (continued) 4 Press ENT. The SET indicator and the Component button turns off. Operating Your Components with the Remote Commander When you operate a non-Sony component, make sure you set the component code first (page 10). If the Component Select button flashes five times before turning off, it means that the setup is incomplete. Start over from Step 1. 5 Check if the code number works by following the instructions on page 12. Notes • If you don't input anything into the Commander within 20 seconds between each step, the setup procedure will be canceled. To set the code, start over from the beginning. • If you press any button other than CH +/- and POWER while setting the component code, all code numbers will be lost, and the setup procedure will be canceled. Start over from the beginning. To cancel setup, press SET. Example: To operate a video cassette recorder 1 Press the desired Component Select button. The Component Select button lights up when you press it, and turns off when you release it. 14