Sony RM-X7BT Operating Instructions - Page 16
NFC function, BLUETOOTH function, The connecting device cannot
View all Sony RM-X7BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Check that the battery of remote commander becomes full. If you use an iPhone, update iOS to the latest version. NFC function One touch connection (NFC) is not possible. If the smartphone does not respond to the touching. Check that the NFC function of the smartphone is turned on. Move the N-Mark part of the smartphone closer to the NMark part on this remote commander. If the smartphone is in a case, remove it. NFC receiving sensitivity depends on the device. If One touch connection with the smartphone fails several times, make BLUETOOTH connection manually. BLUETOOTH function The connecting device cannot detect this adaptor. Before the pairing is made, set this adaptor to pairing standby mode. While connected to a BLUETOOTH device, this adaptor cannot be detected from another device. Disconnect the current connection and search for this adaptor from another device. No ringtone. Depending on the connecting device, the ringtone may not be sent properly. The sound skips during playback of a BLUETOOTH audio device. Reduce the distance between the adaptor and the BLUETOOTH audio device. If the BLUETOOTH audio device is stored in a case which interrupts the signal, remove the audio device from the case during use. Several BLUETOOTH devices or other devices which emit radio waves are in use nearby. Turn off the other devices. Increase the distance from the other devices. The playback sound stops momentarily when the connection between this adaptor and the smartphone is being made. This is not a malfunction. 16GB