Sony RM-X7BT Operating Instructions - Page 9
Getting Started, Turning the Power on, Setting on the Car Audio Unit
View all Sony RM-X7BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installing the adaptor 1 Attach the adaptor to the installation site using the supplied double-sided tape . 2 Connect the AUX cable and USB cable. Note Before attaching the tape, clean each installation site of the adaptor and remote commander with a dry cloth. Getting Started Turning the Power on 1 Turn the ignition on or set the ignition to ACC. The adaptor turns on. To turn the power off Turn the ignition off. The adaptor turns off. Note If your car's ignition has no ACC position, remove the USB cable each time you turn the ignition off to prevent battery drain. Setting on the Car Audio Unit 1 Switch the source on the car audio unit to the AUX source. When connecting the adaptor to the car audio unit, the sound of the device connected to the adaptor is output from the speaker on the car audio unit. 9GB