Sony SCD-1 Operating Instructions (primary manual) - Page 15

Playing Discs Locating a Specific Track Displaying the information of a TEXT disc in other languages You can change the displayed language if the TEXT disc has multi language capacity. When the player detects such a TEXT disc, "TEXT" and "MULTI" appear in the display. Change the language according to the procedures below. 1 Press LANGUAGE in stop mode. The current selected language (English, French, German, etc.) flashes. If the player cannot display the language memorized in a TEXT disc, "Other Lang" appears in the display. 2 Press LANGUAGE repeatedly until the desired language appears in the display. 3 Press TEXT/ENTER. The information appears in the selected language. Notes • If your TEXT disc memorized in one language, the name of that language appears for a few seconds in the display when you press LANGUAGE. • When you press LANGUAGE while playing a TEXT disc, the name of the current selected language appears for a few seconds in the display. During stop or play mode, you can locate any track to be played. Number buttons >10 ./> ER AUTO CD CD MANUAL SELECTOR l/L To go to The next track (AMS*) A preceding track (AMS*) Do the following: Press L Press l repeatedly The beginning of the current track (AMS*) * Automatic Music Sensor Press l during play Locating a track directly by entering the track number Z Press the number button(s) to enter the track number. zTo enter a track number over 11 Z 1 Press >10. 2 Enter the corresponding digits. To enter 0, press 10/0 instead. Examples: • To play track number 30, press >10, then 3 and 10/0. • To play track number 100, press >10 twice, then 1, and 10/0 twice. z If you enter a track number while the player is paused You cannot locate a track in pause mode. The player will still remain paused. 15GB