Sony SCD CE595 Operating Instructions - Page 10

3 Press l AMS L (or ENTER on the remote). The current default layer appears. 4 Turn l AMS L (or press ./> on the remote) to select the desired playback layer. 5 Press l AMS L (or ENTER on the remote). Selecting the playback area When playing a disc with the 2 channel playback area and the multi-channel playback area (page 5), you can select the playback area you want to listen to. Press MULTI/2CH to select the desired playback area. To select the default playback area 1 Press MENU on the player. 2 Turn l AMS L (or press ./> on the remote repeatedly) until "M/2ch SEL" appears in the display. 3 Press l AMS L (or ENTER on the remote). The current default area appears. 4 Turn l AMS L (or press ./> on the remote) to select the desired playback area. 5 Press l AMS L (or ENTER on the remote). Note The multi-channel playback area is automatically selected whenever you start playback because "SEL- Mch" (multi-channel playback area) is the factory setting. Select "SEL- 2ch" (2 channel playback area) when only the ANALOG 5.1CH OUT FRONT L/R jacks are connected. Using the Display The display window shows various information about the disc or track being played. This section describes the current disc information and information that appears for each play status. Disc information when a disc is loaded The display shows the current disc number, total number of tracks and total playing time. A BC F E D A: Total number of tracks B: Hybrid disc C: Currently selected disc and number of playable channels D: Track 16 and above (for discs with 16 or more tracks) E: Total playing time F: Current disc number Notes on the disc number indications • The red circle around a disc number indicates the disc is ready to be played. • A semi-circle around the disc number indicates a disc with tracks to be played. In Program Play mode, the semi-circle indicates a disc with programed tracks. • The disc number disappears when no disc is detected in the disc component. 10US