Sony SCD CE595 Operating Instructions - Page 9

Playing Discs Playing Discs Playing a Disc The operations for normal play and the basic operations during play are explained below. 1 Turn on the amplifier. Turn down the volume level to the lowest. 2 Select the player position using the input selector on the amplifier. 3 Press POWER on the player to turn on the player. 4 Press A OPEN/CLOSE on the player to open the disc tray, and place a disc on the tray. 7 Press H. Playback starts from the first track. If you want to start playing from a specific track, turn l AMS L (or press ./> on the remote repeatedly) to select the track number before pressing H. 8 Adjust the volume on the amplifier. Basic operations during play To Stop play Pause play Resume play after pausing Select a track Select a disc Eject a disc Do the following: Press x. Press X. Press X or H. Turn l AMS L (or press ./> on the remote repeatedly). Press DISC SKIP (or DISC SKIP +/- on the remote) repeatedly. By pressing DISC 1-5 on the player, you can select a specific disc directly. Press A OPEN/CLOSE on the player. With the label side up Disc number 5 To place other discs, press DISC SKIP (or DISC SKIP +/- on the remote) repeatedly and place the discs in the order you want to play. Each time you press the button, the disc tray turns and you can place the discs in the empty disc compartments. The player plays the disc in front of you first. 6 Press PLAY MODE (or CONTINUE on the remote) repeatedly to select ALL DISCS or 1DISC Continuous Play mode. Each time you press CONTINUE on the remote, "ALL DISCS" or "1 DISC" appears in the display. When you select The player plays ALL DISCS All discs in the player consecutively in the order of disc number 1DISC Only the disc you have selected Note During playback, increase the volume level gradually starting from the lowest level. The output from this player may contain band width that is out of the normal listening range. This may cause damage to the speakers or ears. Selecting the playback layer When playing a hybrid disc with an SA-CD layer and a CD layer (page 5), you can select the layer you want to listen to. Also, since both layers are on one side, it is not necessary to turn the disc over. Press SA-CD/CD to select the desired playback layer. To select the default playback layer 1 Press MENU on the player. 2 Turn l AMS L (or press ./> on the remote repeatedly) until "LAYER SEL" appears in the display. continued 9US