Sony SCD CE595 Operating Instructions - Page 8

Connecting a digital component When you connect an MD deck or another digital component through the DIGITAL (CD) OPTICAL OUT connector, you can make a digital recording. Use an optical digital cable for this connection. When connecting the optical digital cable to the DIGITAL (CD) OPTICAL OUT connector, push the cable plug in until it clicks into place. Be careful not to bend or twist the optical cable. Optical digital cable (not supplied) To CD optical digital input connector on an MD deck, etc. Note Only the audio signals of conventional CDs can be output from the DIGITAL (CD) OPTICAL OUT connector. Those of the Super Audio CD cannot be output through the DIGITAL (CD) OPTICAL OUT connector. When using another Sony CD player in conjunction with this player You can set the supplied remote to be effective on this player only by changing the command mode of the remote. To set the command mode of the remote • If the other player's command mode can be set: Set the CD1/2 switch of this player's remote to CD1 (factory setting), and set the other player's remote to CD2. • If the other player's command mode cannot be set: Set the CD1/2 switch of this player's remote to CD2. To set the command mode of this player 1 Press MENU on the player. 2 Turn l AMS L (or press ./> on the remote repeatedly) to select "CD1/2 SEL". 3 Press l AMS L (or ENTER on the remote). The current command mode appears. 4 Turn l AMS L (or press ./> on the remote) to select "CD - 1" or "CD - 2", then press l AMS L (or ENTER on the remote). Connecting the AC power cord Connect the AC power cord to a wall outlet. 8US