Sony SCD CE595 Operating Instructions - Page 18

2 Press ./> repeatedly until "TONE ON" appears in the display. 3 Press ENTER. The test tone issues from the speakers in sequence with the speaker type appearing in the display. 4 Press ./> repeatedly until the desired item appears in the display. Select the item from "SURR BAL", "CNTR BAL", or "SW BAL". Note When you set the sub woofer to "--" in the Multichannel mode (page 16), "SW BAL" cannot be adjusted ("NOT IN USE" appears). Similarly, "CNTR BAL" or "SURR BAL" cannot be adjusted ("NOT IN USE" appears) when you set the corresponding speaker to "--". 5 Press ENTER. The balance adjustment display appears. In stop mode, the test tone is output from the selected speaker. Example: When you select "SURR BAL" during stop mode, the test tone is output from the front speakers and surround speakers. 6 Press ./> repeatedly to adjust the output level. Note The output level balance can be adjusted in up to 24 steps. Since fine adjustments can be made, it may be difficult to observe the movement of needle. 7 Press ENTER. The player status returns to Step 4. Repeat Steps 4 through 7 for more adjustments. 8 Press LEVEL ADJ after you finish adjusting. The display returns to the normal display. Adjusting the speaker distance You can adjust the speaker distance when the connected amplifier does not have the setting menu for speaker distance. If the amplifier has this function, we recommend that you set the speaker distance on the amplifier. This setting is available only for the Multi-channel Super Audio CD. Note When you set the speaker distance on this player and the amplifier, both of the setting may work and you may not be able to get the proper result. FRT DIST The distance from your listening position to the front speakers You can adjust from 3 to 23 feet (1.0 meter to 7.0 meters) in 1 foot (0.1 meter) steps. If both front speakers are not placed an equal distance from your listening position, set the distance to the closest speaker. SURR DIST The distance from your listening position to the surround speakers You can adjust from 3 to 23 feet (1.0 meter to 7.0 meters) in 1 foot (0.1 meter) steps. If both surround speakers are not placed an equal distance from your listening position, set the distance to the closest speaker. CNTR DIST The distance from your listening position to the center speaker You can adjust from 3 to 23 feet (1.0 meter to 7.0 meters) in 1 foot (0.1 meter) steps. SW DIST The distance from your listening position to the sub woofer You can adjust from 3 to 23 feet (1.0 meter to 7.0 meters) in 1 foot (0.1 meter) steps. DIST UNIT The unit of measure for setting distances (meter or feet) The initial setting is "SEL-FEET" for the North American model and "SEL-METER" for the European model. 18US