Sony SDM-S204 Operating Instructions (primary manual) - Page 6

Rear of the LCD display I AC IN connector (page 7) This connector connects the power cord (supplied). J HD15 input connector (analog RGB) (page 7) This connector inputs analog RGB video signals (0.700 Vp-p, positive) and sync signals. K DVI-D input connector (digital RGB) (page 7) This connector inputs digital RGB video signals that comply with DVI Rev.1.0. L Cable holder (page 8) This part secures cables and cords to the monitor. M Security lock hole The security lock hole should be used with the Kensington Micro Saver Security System. Micro Saver Security System is a trademark of Kensigton. Setup Before using your monitor, check that the following items are included in your carton: • LCD display • Power cord • HD15-HD15 video signal cable (analog RGB) • DVI-D video signal cable (digital RGB) • CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc.) • Warranty card • Quick Setup Guide Setup 1: Connect the video signal cables • Turn off the monitor and computer before connecting them. • When connecting the computer to the monitor's HD15 input connector (analog RGB), refer to "Connect a computer equipped with an HD15 output connector (analog RGB)." Note • Do not touch the pins of the video signal cable connector as this might bend the pins. • Check the alignment of the HD15 connector to prevent bending the pins of the video signal cable connector. 1 Slide up the back cover. 2 Tilt the display forward. 6