Sony SDM-S204 Operating Instructions (primary manual) - Page 8
Setup 3:Bundle the cords and, cables, Setup 4:Turn on the monitor and, computer - monitor stand
View all Sony SDM-S204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setup 3: Bundle the cords and cables 1 Slide up the back cover. 2 Remove the stand cover. 3 Secure the video signal cables using the cable holder on the cabinet. 4 Feed the power cord through the hole on the left of the stand and secure the power cord and video signal cables using the cable holder. 5 Replace the stand cover and then slide down the back cover. Please be sure that cords come out through the opening at the bottom of the stand cover, for proper placement of the stand cover. 15 back cover 34 25 stand cover Setup 4: Turn on the monitor and computer 1 Press the MAIN POWER switch located on the right side of the monitor in the direction of the [, if it is not already pressed. Make sure the 1 (power) indicator is lit in red. Note The monitor is factory shipped with the MAIN POWER switch set to on ([). MAIN POWER lights in red 2 Press the 1 (power) switch on the front right of the monitor. The 1 (power) indicator lights up in green. lights in green cable holder 3 Turn on the computer. 4 Press the INPUT button to select the desired input signal. The selected input's picture appears on the screen. For more information, see "Selecting the input signal (INPUT button)" on page 10. INPUT The installation of your monitor is complete. If necessary, use the monitor's controls to adjust the picture (page 11). 8