Sony SLT-A37M User Manual - Page 191
The lens gets fogged., The number of recordable images does not decrease or decreases 2 at
View all Sony SLT-A37M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Trouble shooting/Others (Advanced operations) Troubleshooting • This camera does not have a feature for superimposing dates on images. However, because the images shot with the camera include information on the recording date, you can print images with the date superimposed if the printer or the software can recognize Exif information. For compatibility with Exif information, consult the manufacturer of the printer or the software. • When you print images at a shop, images can be printed with the date if you ask them to do so. Others The lens gets fogged. • Moisture condensation has occurred. Turn off the camera and leave it for about 1 hour before using it (page 195). The message "Set Area/Date/Time." appears when you turn on the camera. • The camera has been left unused for sometime with a low battery or no battery pack. Charge the battery pack and set the date again (pages 27, 195). If the date setting is lost every time the battery pack is charged, consult your Sony dealer or local authorized Sony service facility. The number of recordable images does not decrease or decreases 2 at a time. • This is because the compression rate and the image size after compression change depending on the image when you shoot a JPEG image (page 154). The setting is reset without the resetting operation. • The battery pack was removed when the power switch was set to ON. When removing the battery pack, make sure the camera is turned off and the access lamp is not lit (pages 16, 21). The camera does not work properly. • Turn off the camera. Remove the battery pack and insert it again. If the camera is warm, remove the battery pack, and allow it to cool down before trying this corrective procedure. • If an AC Adaptor (sold separately) is used, disconnect the power plug. Connect the power plug and turn on the camera again. If the camera does 191