Sony SLV-400 Operating Instructions - Page 13

Hookups and Getting Started VCR Setup (Alternate Cable) 1 Set the RF Unit on the VCR's rear panel to CH3 or CH4. If you made A/V connections, skip this step. Clock Setting Press MENU. MENU TIMER SETACHECK • TUNER PRESET CLOCK SET Select CLOCK SET. MENU TIMER SET/CA.0A TUNER PRESET A CI.00N SET 2 Switch on your cable box. 3 Preprogram the channels into the VCR. Press MENU. MEM • TIMER SETA:NECK TUAER PRESET CLOCK SET Select TUNER PRESET MENU TIMER SETICITECA TUNER PRESET • CLOCKS.. Select AUTO PRESET, then press EXECUTE. TUNER PRESET CR 3 ROPING/EV .NORM CAW • AUTO PRESET MAMA,SET *ADD ERASE AFT CR OFF FINE TONNE, Details are on pages 20 and 21 Set time then press EXECUTE. CIRCA SET 7/ Op. StlN Details are on page 18. To Watch the TV 1 Turn your VCR off, or press the VCR's TV/VTR button until the VTR indicator in the display window goes off. 2 Switch on your cable box. 3 Tune the TV to the cable box output channel (usually 2, 3, or 4). 4 Select the channel that you want to watch with your cable box. To Watch the VCR 1 Tune the TV to CH 3 or CH 4 (or to A/V input if you made A/V connections). 2 Insert a cassette and press I> PLAY. Details are on page 24. To Record a Program 1 Insert a cassette. 2 Switch on the cable box. 3 Select the channel you wish to record on the cable box. 4 Press MENU, and select TIMER SET/CHECK, and press EXECUTE. 5 Set DATE, START time, STOP time, Channel and tape recording speed. The channel number must be the same as the cable box output channel (2, 3 or 4). 6 Press EXECUTE and then TIMER REC (ON/OFF). 7 Leave the cable box ON. Details are on pages 31 and 32. 13 Preparation